QUOTE (Kootenay Joe @ Jul 11 2008, 11:00 AM)

This week I found out - the hard way - that a Curve D3 can be easily wheeled while folded with the seatpost extended.
No pump. I left my rackpack with it behind. No seatpost pump. I swapped it out for the suspension seatpost for this ride. No patch kit.
Got out to the roads. Pushed for a mile or so. Met 4 cyclists, none of whom had a patch kit or pump or the time to lend me one while I fixed the flat anyway (commuters going home).
Made it to the main highway, which has a bus route, but only hourly service. I have my bus pass. Only 7 miles home now. The rear wheel is "bouncing" badly as all that Big Apple rubber "flubs" around. Pushing is getting awkward.
At the first bus stop I fold the bike to wait for a bus, but I can tell that one won't be along for a while.
On a whim I extend the seatpost fully and try to push the folded bike. It works! A slight twist of the wrist ensure that the folded front wheel (which is not flat and rolls freely in both directions) is the rolling wheel.
I've heard a lot of people say you can't roll a folded Dahon bike. Well, they're wrong. I did two miles this way very easily.
Caught the bus and boarded with the folded bike (score one for a folder). Got to the main bus loop and saw a line of cabs. Flagged one and popped the folded bike in the trunk (score two for a folder). Made it home.
Definitely a learning experience. I learned/relearned:
1.) That pump-post is useful.
2.) Patch kits fit easily in pockets.
3.) Big Apples are comfortable, but puncture easily (my third puncture in one year).
4.) Don't ride any farther than you are prepared to walk without a pump and patchkit.
5.) Folding bikes are very versatile for multi-mode transport, even when you can't ride them.
Now how do I stop myself from doing this again? I want to use the suspension seatpost sometimes as those 16" wheels are a bit harsh even with Bg Apples.
Pulled out the water-bottle braze-on mounted minipump that I carried in my rackpack. Why isn't this thing mounted on the water-bottle mount? Oh yeah, it interfered with the hinge. Well that long walk has convinced my I should put some thought into this. Longer bolts and some offset washers solve the hinge interference issue. Now I will always have a pump no matter which seatpost I choose......
You highlighted many of the reasons I use folding bikes exclusively now. Since I have 3 different models, from different years, even different makes, I tend to use parts that are interchangeable and not connected to a sole bike/part. My pump is used only at home. If I suffer a flat, I could not fix it myself out there-too much potential criminal trouble-so I am aware of all bike shops in my route and drop the bike off there. I use public transit whenever it suits me-and the bike when it is the best way of getting around. The key word here is options, choices which is not usually available to others with the regular bikes. That is why I switched over and will probably never go back to regular bikes again.