SOS
Bike Manual
Owner's Manual
Specifications
| COLORS |  |
| SPEEDS | 3 |
| GEAR INCHES | 41"/56"/77" |
| DISTANCE: SEAT POST TO HANDLEBAR | Min: 640mm(25.2") Max: 645mm(25.4") |
| DISTANCE: SADDLE TO PEDAL | Min: 710mm (28") Max: 960mm (37.8") |
| FOLDED SIZE | 33 x 66 x 77 cm (13" x 26" x 30.5") |
| WEIGHT | 14.4 kg (31.7 lbs.) fully equipped |
| FOLDING TIME | 15 seconds |
| SUGGESTED RIDER HEIGHT | 142 cm - 193 cm (4'8" - 6'4") |
| MAX RIDER WEIGHT | 105 kg. (230 lbs.) |
| FRAME | K Series, SuperLite 4130 chromoly, forged Lattice hinge, patented ViseGrip™, WrapAround technology, forged drop outs |
| FORK | Integrated, patented Fusion technology |
| HANDLEPOST | Radius Telescope™ adjustable, patented Fusion™ technology, forged aluminum, patented InSide™ lock |
| HANDLEBAR | 6061-T6 aluminum, Flat bar |
| HEADSET | Dahon Fusion, Zero stack, cartridge bearings |
| GRIPS | SRAM |
| SADDLE | BioLogic™ AirFlo, Mojo Groove design |
| SEAT POST | BioLogic™ PostPump |
| BRAKES | ProMax V, aluminum, linear spring |
| BRAKE LEVER | ProMax V, aluminum bracket/aluminum lever |
| CABLES AND HOUSING | SIS, Pearl silver housing, slick cables |
| FRONT HUB | BioLogic™ Joule dynamo, 6V/2.4W |
| REAR HUB | SRAM 3 speed hub, coaster |
| SPOKES | 14 G, stainless steel, brass nipples |
| RIMS | Aluminum, silver anodized |
| TIRES | Schwalbe Marathon Plus, SmartGuard Puncture Protection |
| SHIFTERS | SRAM 3 speed |
| FREEWHEEL | Dahon Special Edition, 13T |
| CRANKSET | Cold-forged 6061 aluminum crank arms, hand-polished |
| BOTTOM BRACKET | Cartridge, sealed bearings |
| CHAIN | KMC Z610RB, RustBuster |
| PEDALS | Suntour folding, non-slip |
| MUDGUARDS | SKS Mini 20, stainless hardware |
| RACK | Tour, rear with rack strap |
| FRONT LIGHT | Hella Micro FF, Halogen, Dynamo powered |
| REAR LIGHT | Hella Deluxe combi light |
| KICKSTAND | Aluminum, Dacromet bolt |
| CLIP SYSTEM | Magnetix™ system |
| ACCESSORY | Reflective pants clip |
| *Note: These are our standard model specifications. The specifications for your country may differ slightly. We do our best to ensure that the specifications listed here accurately reflect the exact parts found on our production bikes. However, component changes do occur for various reasons and there may be brief delays on site updates. Also our distributors also regularly ask us to make component modifications to better reflect the requirements of their local markets. We reserve the right to make component changes without prior notification, which may cause discrepancies with the information listed on the web. | |