Piccolo D3
Bike Manual
2005 Bikes

Specifications
| COLOR | Coastal Blue |
| SPEEDS | 3 |
| GEAR INCHES | 40" - 75" |
| DISTANCE: SEAT POST TO HANDLEBAR | 600 mm (23.6") |
| DISTANCE: SADDLE TO PEDAL | Min: 710mm (28"); Max: 935mm (36.6") |
| FOLDED SIZE | 28 x 51 x 73 cm (11" x 20" x 30") |
| WEIGHT | 11.6 kg (25.5 lbs.) base model w/o options |
| FOLDING TIME | 15 seconds |
| SUGGESTED RIDER HEIGHT | 137 cm - 188 cm (4'6" - 6'2") |
| MAX RIDER WEIGHT | 105 kg. (230 lbs.) |
| FRAME | Y Series, SuperLite 4130 chromoly, work-hardened Sonus tubing, forged Lattice hinge, patented Re-Bar frame design, forged drop-outs |
| FORK | Integrated, Fusion technology, 13A steel, forged ends |
| HANDLEPOST | Integrus Telescope adjustable, forged steel, patented Fusion technology |
| HANDLEBAR | Riser, 6061 aluminum |
| STEM | ProLite Revolve stem, aluminum |
| HEADSET | Dahon Fusion, Zero stack, cartridge, sealed |
| GRIPS | SRAM |
| SADDLE | Velo Comfort |
| SEAT POST | Telescope two-section seat post, super-oversize |
| BRAKES | ProMax V-brake, aluminum |
| BRAKE LEVER | ProMax V-brake, aluminum |
| CABLES AND HOUSING | SIS, Pearl silver housing, slick cables |
| FRONT HUB | Formula, aluminum, Dahon custom narrow width, sealed |
| REAR HUB | Sturmey-Archer 3 spd., freewheel |
| SPOKES | 14 G, Stainless steel |
| RIMS | Weinmann, aluminum |
| TIRES | Kenda Kwest, 16" x 1.5", 65 psi high pressure, skinwall |
| SHIFTERS | Sturmey-Archer Twist |
| FREEWHEEL | Dahon custom, CompactDrive |
| CRANKSET | Sugino, cold-forged crank arms, hand-polished |
| CHAINGUARD | WeatherBeater full chainguard, smoke |
| BOTTOM BRACKET | U-type, water resistant |
| CHAIN | KMC narrow |
| PEDALS | Suntour, folding, non-slip |
| KICKSTAND | Aluminum, Dacromet bolt |
| CLIP SYSTEM | Magnetix system |
| TOUCH UP PAINT | Yes |
| ACCESSORY | Reflective pants clip |
| *Note: These are our standard model specifications. The specifications for your country may differ slightly. We do our best to ensure that the specifications listed here accurately reflect the exact parts found on our production bikes. However, component changes do occur for various reasons and there may be brief delays on site updates. Also our distributors also regularly ask us to make component modifications to better reflect the requirements of their local markets. We reserve the right to make component changes without prior notification, which may cause discrepancies with the information listed on the web. | |